DIY Success - Installing Your New Shower Unit Properly

Book A Service Call



Are you currently looking for advise concerning How to Install a Shower Enclosure ?


Simple ways to Install a Shower Cubicle on Your Own
An effective shower installment requires cautious preparation and also a lot of work. In many cases, you will certainly require to do 3 types of tasks: mounting wall surfaces, installing the plumbing, and completing wall surfaces.

Prep work


Firstly, you should select the sort of shower that you want to set up. It is important to determine whether the selected shower is capable of dealing with particular systems and can regulate a risk-free degree of water via the boiler. A lot of shower systems nowadays are made to be adaptable to different water pressures (such as kept warm water and also cold mains).
It is likewise crucial to take into account the water pressure as well as the preparation of the piping and also water drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be connected to the bath tap according to your demand, and also the water temperature level can be adjusted using the faucets. Push-on mixers are cheap and also extremely easy to set up. Nevertheless, although the pipe link is straightforward, it is quickly removed. Furthermore, it is troublesome to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe as well as spray of this kind of shower are integrated with a bathroom mixer faucet, as well as the temperature level can be changed with the bathroom taps. It is a very low-cost choice as well as no additional plumbing is included. Nevertheless, the bath/shower mixers likewise struggle with bothersome temperature level control alternatives.

  • Guidebook Mixer: The pipe as well as spray of a manual mixer shower unit belong of the wall surface device and also the cold and hot water materials are linked to a single valve The temperature level and also stress of the water are managed with either one or a variety of knobs (in more pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are much more expensive than the formerly discussed mixers. They also need additional plumbing of cold and hot supply of water pipelines.

  • Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall system as well as the hot and cold water supplies are connected to a single shutoff right here also. It is total with an integrated stabiliser to self-adjust the water temperature level and also to avoid it from coming to be also warm. One of the most significant benefits of a thermostatic mixer shower kind consists of practical temperature control. Nevertheless, it is the most pricey of the different mixer options.

  • Power Shower: A power shower is a solitary system including a powerful electric pump that is capable of altering both the water stress and also temperature level. This kind of shower can be fitted if there is water system from a cold water tank and a hot water cyndrical tube. A power shower makes the change of both pressure and temperature level simple. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a combination central heating boiler under mains stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is important to keep in mind that for this shower type to be set up, the mains pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature and also pressure to be changed via a handle. Versions with temperature stabilisers are much better as they remain unaffected by other faucets in other places being used within the house. A major downside of electric showers is that the control handle only enables the alternative of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter season when the spray is commonly weak and the keys water is colder. Nevertheless, this trouble is taken on in some models which are offered with a winter/summer setup.


  • Technique


    Depending upon the kind of shower you wish to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check valve.
    Before beginning, it is recommended to mark the placements of the shower head and also control, as well as to intend the pipe-work involved. Furthermore, the drainage system to remove the drainage will certainly need to be planned. Both placements of the cable path and also the shower switch will additionally need to be thought about if a rapid or electric shower system is being mounted.
    Use the direction guide supplied with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is necessary to remove the water supply. In order to safeguard the pipelines, they need to be given a waterproof covering and likewise fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also smudged over to neaten the overall look.
    Fit the base tray, shower head, as well as fittings.
    Connect the main shower control to the pipes that will be supplying the water (This may require a female screw thread adapter).
    Reconnect the water supply and test the pipes for any type of leakages, as some might need tightening.
    If you are installing an electrical shower, keep in mind to turn off the power supply prior to making any kind of electric connections. Once these connections have been made (there should be assistance within the instruction manual), the power supply can be switched back on.

    Adjusting Water Stress to Match Your Shower


    The cold water tank can be lifted to a higher height (sometimes just 150mm (6inches)) by installation a strong wooden assistance beneath it - possibly made up of struts and blockboards. If you pick this alternative, the primary and distribution pipelines will certainly also need to be increased to meet the brand-new elevation of the reservoir.
    Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be linked into the power supply in order to run.

    Piping as well as Water drainage


    It is best to make use of 15mm diameter supply pipelines, as well as make the go to the shower as brief and straight as feasible so regarding preserve optimal pressure and also minimise warmth loss. Additionally, by minimising making use of arm joints for pipe edges, you can decrease the resistance in the circulation of the supply of water. You can attain this by flexing the pipes rather.

    Many Common Blunders


  • Breaking or ignoring neighborhood code restrictions.

  • Making use of pipes that are also small.

  • Affixing copper to galvanized without utilizing a brass or dielectric suitable between the two.

  • Not using tape or pipe compound at threaded joints.

  • Uneven your fixtures when mounting them.

  • Not mounting an air space loading for components.

  • Cutting supply stub outs also short to set up the shutoff valves onto after the finished wall remains in place.

  • Not appropriately aligning tubing right into installations or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly cause a leakage.).

  • When turning the water back on in your house, always run the outdoors hose valve or purge your commodes to bleed dirt as well as air from the lines. This particles can cause issues in your sink taps and various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Build a Shower Enclosure for Your DIY Bathroom

    Hopefully you enjoyed reading our section about How to Install a Freestand. Thanks for finding the time to browse our short article. Are you aware of somebody who is curious about the subject? Feel free to promote it. Thank you so much for going through it.




    Book Appointment Now


    Leave a Reply

    Your email address will not be published. Required fields are marked *